Shortcuts

IDEXX VetAutoread™ Haematology Analyser

Comprehensive answers in minutes


The IDEXX VetAutoread™ Haematology Analyser* offers thorough screening, presurgical testing and general health checkups in-house.

The IDEXX VetAutoread analyser connects to the IDEXX VetLab Station , a laboratory information management system that collects all results into an electronic medical record and prints them on an integrated report for easy interpretation.

Test Menu

Available parameters

Parameter Description
Haematocrit (Hct) Calculated as the percentage of packed red cell volume to the total blood sample volume. Reported as Hct %.
Haemoglobin (Hgb) The calculation is derived from a measurement of the depth that the float descends into the packed red cells (a function of red cell density) and the hematocrit. The analyser makes corrections for buffy coat volume. Reported as Hgb (g/dL).
MCHC Mean corpuscular haemoglobin concentration (haemoglobin/haematocrit) x 100.
WBC This parameter combines the total granulocyte and lymphocyte/monocyte measurements. Reported as WBC x 109/L. The analyser will also report "106 x mL" and "103 x µL."
Total Granulocyte Count (GRANS) This buffy coat segment consists of granulocytes (neutrophils, eosinophils, basophils). The length of this band is converted into a total granulocyte count. Reported as GRANS x 109/L.
Percentage Granulocytes Granulocytes expressed as a percentage of the total white cell count and displayed as % GRANS.
Eosinophils (EOS)
Neutrophils (NEUT)		 Only available for canine and bovine samples; high levels of eosinophils (> ∼ .5 x 109/L) can be recognized and quantified by the analyser. In these cases, the eosinophil count and neutrophil count (by subtraction) are printed after the % GRANS. (Any basophils present are included in the neutrophil count.)
Total Lymphocyte/Monocyte Count (L/M) Stained lymphocytes and monocytes comprise one segment of the buffy coat. The length of this band is converted into a total lymphocyte/monocyte count. Reported as L/M x 109/L.
Percentage Lymphs/Monos Lymphocytes and monocytes can also be expressed as a % of the total white cell count. Displayed as % L/M.
Platelet Count (PLT) Stained platelets comprise the lowest density layer of the buffy coat. The length of this band is converted into a numerical platelet count value. Reported as PLT x 109/L.
% Reticulocytes This parameter is only available for canine and feline samples; expressed as a percentage of the (RETICS) haematocrit, within the range of 0.2% ≤ x ≤4.0%.
Fibrinogen (Fib) Total plasma fibrinogen is reported as mg/dL.

 

How To / Resources

Run a fresh sample immediately—before your patient's condition worsens

 
Running a sample on the IDEXX VetAutoread™ analyser*
  1. Prepare the sample.
  2. Spin the sample in the IDEXX VetCentrifuge™ for five minutes.†
  3. Select the applicable species on the analyser, insert the tube into the analyser’s loading carriage and close the door.

That’s it! In one minute the analyser provides a species-specific result.

 

The IDEXX Fibrinogen Precipitator

The IDEXX Fibrinogen Precipitator is specifically designed for use with the IDEXX VetAutoread™ Haematology Analyser. Its electronically controlled temperature range provides maximum consistency of plasma fibrinogen in the IDEXX VetTubes™.

 

How to precipitate plasma fibrinogen:
  1. Place a previously spun IDEXX VetTube in one of the four holes located in the face of the IDEXX Fibrinogen Precipitator.
  2. Approximately five minutes after placing the tube in the precipitator, remove the tube and spin it in the IDEXX VetCentrifuge. Note: The IDEXX VetCentrifuge is specifically designed for use with the IDEXX VetAutoread Haematology Analyser. Its electronically controlled rotor speed and timing provide maximum consistency in the formation of packed cell layers in the spun IDEXX VetTubes.
  3. Select the applicable species on the analyser, insert the tube into the loading carriage and close the door.

Results are ready in just one minute.

 

Resource List

Sample Preparation Poster

IDEXX VetAutoread Hematology

Support

We’re here to help you 24 hours a day, seven days a week

Customer Service: 1300 44 33 99

iCARE

Keeping your practice up-to-date and running smoothly is the iCARE  promise. We’re at your service 24 hours a day, seven days a week to help you deliver the best veterinary care and customer experiences possible.

i-Dx Ordering

Learn more about ordering directly from IDEXX  and order your in-house tests and supplies today.

† The IDEXX VetCentrifuge is specifically designed for use with the IDEXX VetAutoread Hematology Analyzer. Its electronically controlled rotor speed and timing provide maximum consistency in the formation of packed cell layers in the spun IDEXX VetTubes.

*VetAutoread is a trademark of QBC Diagnostics, Inc.